Adata Cortex MD 2MP IP66 Manual do Utilizador Página 1

00P3NV102ZXSEA3 Full HD Real-time Compact IP Dome Camera Indoor/Rugged User Manual Ver1.3

93. Deleting the Existing DC Viewer For users who have installed the DC Viewer in the PC previously, please first delete the existing DC Viewer from

10 STEP 1: Click the “Tools” tab and select the option “Internet Options.” STEP 2: Click on “Delete”, then tap the “Delete Files” in the “Tempora

11 The popup window for confirmation will come out as shown below. Click “OK” to start deleting the files.

12 4. Accessing Camera For initial access to the IP Camera, users can search the camera through the installer program: DeviceSearch.exe, which can be

13 Step 4: Double click or right click and select “Browse” to access the camera directly via web browser. Step 5: Then the prompt window of req

14 NOTE: ID and password are case sensitive. NOTE: It is strongly advised that administrator’s password be altered for the security concerns. Refer

15 Step 3: Click “OK” on the Note of setting change. Wait for one minute to re-search the IP Camera. Step 4: Click the “Device Search” button to

16 Installing DC Viewer Software Online For the initial access to the IP Camera, a client program, DC Viewer, will be automatically installed to your

17 Administrator/User Privileges “Administrator” represents the person who can configure the IP Camera and authorize users access to the camera; “Us

18 Step 2: Loosen the focus fixed screw, and rotate the lens counter-/clockwise to adjust focus; loosen the tilt fixed screw, and adjust the camera’s

1Table of Contents 1. Introduction...3

195. Configuration & Operation The IP Camera is provided with a user-friendly browser-based configuration interface, as well as a free bundled CM

20 There are five tabs: Home, System, Streaming, Camera and Logout on the top of the viewer window. Home Users can monitor live video of the targete

215.2 Home Page In the Home page, there are several function buttons right down the displayed image. NOTE: Please note that the function buttons

22 Snapshot button Press the button, and the JPEG snapshots will automatically be saved in the appointed place. The default place of saving snapshots

235.3 System Related Settings The figure below shows all categories under the “System” tab. Each category in the left column will be explained in th

24 5.3.1 Host Name and System Time Setting Press the first category: <System> in the left column; the page is shown as below. Host Name T

25Manual The Administrator can set video date, time and day manually. Entry format should be identical with that shown next to the enter fields. Syn

26 NOTE: The following characters are valid: A-Z, a-z, 0-9, !#$%&’-.@^_~. Add user Type the new user's name and password and click <Ad

27

28 5.3.3 Network Click <Network> in the left column, and the page will display as shown below. Users can choose to connect to the IP Camera

2 5.4.6 Audio Mode and Bit Rate Settings... 62 5.5 Camera Settings...

29Use fixed IP address To setup static IP address, select “Use fixed IP address” and move the cursor to the IP address blank (as indicated below) and

30 • Default gateway This is the gateway used to forward frames to destinations in different subnet. Invalid gateway setting will fail the transmis

31UPnP Setting • Enable UPnP When the UPnP is enable, whenever the IP Camera is presented to the LAN, the icon of the connected IP Cameras will app

32 NOTE: To enable this function, please make sure the UPnP component is installed on your computer. Please refer to Appendix D: Install UPnP comp

335.3.4 DDNS Dynamic Domain Name System (DDNS) allows a host name to be constantly synchronized with a dynamic IP address. In other words, it allows

34 Password/Key Enter the password or key required by the DDNS provider for authentication. 5.3.5 Mail The Administrator can send an e-mail via Simp

355.3.6 FTP The Administrator can set as sending alarm message to a specific File Transfer Protocol (FTP) site when motion is detected. Users can ass

36 5.3.7 Motion Detection Motion Detection function allows detecting suspicious motion and triggering alarms when motion volume in the detected area

37If Motion Detection function is activated, the pop-off window (Motion) with indication of motion will be shown. When motion is detected, the sig

38 • Sensitivity level [1-100]: The default level is 80, which means if 20% or more sampling pixels are detected differently, system will detect m

31. Introduction Following high standard of Megapixel IP Camera, the Full HD Compact IP Dome Camera is capable of serving real-time streaming and mak

39 • Upload Image by E-Mail Select this item, and the Administrator can assign an e-mail address and configure various parameters as shown in the f

40 5.3.8 Storage Management Users can implement local recording to the Micro SD/SDHC card. NOTE: Please format the Micro SD/SDHC card first before

41Recording List Each video file on the Micro SD/SDHC card will be listed in the Recording list as shown below. • Remove To remove a file, selec

42 5.3.9 Recording In the Recording setting page, users can specify the recording schedule that fits the present surveillance requirement. Activ

435.3.10 File Location Users can specify a storage location for the snapshots and live video recording. The default setting is: C:\. Once confirm the

44 5.3.11 View Log File Click on the link to view the system log file. The content of the file provides useful information about configuration and c

455.3.12 View User Information The Administrator can view each added user’s login information and privileges (see 5.3.2 Security). View User Login

46 View User Privilege Press “get user privacy” down the page, and the Administrator can view each user’s privileges. As the figure above shows:

475.3.13 View Parameters Click on this item to view the entire system’s parameter setting.

48 5.3.14 Factory Default The factory default setting page is shown as below. Follow the instructions to reset the IP Camera to factory default setti

4 1.2 Package Contents Please check the package contains the following items listed below. Indoor Camera/ Rugged Camera (with Cable) Self-tapping s

495.3.15 Software Version The current software version is displayed in the software version page, which is shown as the figure below.

50 5.3.16 Software Upgrade Software upgrade can be carried out in the “Software Upgrade” page, as shown below. NOTE: Make sure the upgrade softwar

51Step 1: Click “Browse” and select the binary file to be uploaded, ex. Userland.jffs2. NOTE: Do not change the upgrade file name, or the system

52 After the upgrade process is finished, the viewer will return to Home page. Step 4: Close the video browser. Step 5: Click “Control Panel”, an

535.3.17 Maintenance Users can export configuration files to a specified location and retrieve data by uploading an existing configuration file to th

54 Upload To copy an existing configuration file to the IP Camera, please first click on “Browse” to select the configuration file, and then press th

55Video Format The IP Camera provides various video resolution like the following: • H.264 720p (30fps) ＋ MJPEG 720p (30fps) • H.264 720p (30fps)

56 The following is descriptions for different video rotate type. • Flip If select <Flip>, the image will be rotated vertically. • Mirror

575.4.2 Video Compression Users can select a proper MJPEG/H.264 compression mode in the video compression page (see the figure below), depending on t

58 CBR Mode Setting The CBR (Constant Bit Rate) mode could be the preferred bit rage mode if the bandwidth available is limited. It is important t

5Dimensions

595.4.3 Video OCX Protocol In the Video OCX protocol setting page, users can select RTP over UDP, RTP over TCP, RTSP over HTTP or MJPEG over HTTP, f

60 5.4.4 Video Frame Skip Video frame skipping is for saving bandwidth if necessary. The setting page is shown as below. Video Frame Skip options

615.4.5 Video Mask Active Mask Function • Add a Mask Check a Video Mask checkbox, and a red frame will come out in the Live Video pane at the r

62 Mask Setting • Mask color The selections of Mask color include red, black, white, yellow, green, blue, cyan, and magenta. • Type Select to chan

63Server Gain Setting Set the audio input gain levels for sound amplification. The audio gain values are adjustable from 1 to 6. The sound will be tu

64 5.5.1 Exposure Setting The Exposure pull-down menu is shown as follows: The exposure is the amount of light received by the image sensor and is

655.5.2 White Balance Setting The White Balance pull-down menu is shown as follows: A camera needs to find reference color temperature, which is a

66 5.5.3 Brightness Setting Users can adjust the image’s brightness by adjusting the item. To increase video brightness, select a bigger number. Pr

675.5.7 Hue Setting Camera image hue level is adjustable; please select ranging from -12 to +13. Press <SET> to confirm the new setting. 5.5

68 5.6 Logout Press the tab “Logout” in the top of the page, and the login window will pop up. This enables login with another user name.

6 2. Preparations for IP Camera Setup This chapter provides information about system requirements for IP Dome Camera operation, power and Ethernet c

696. CMS Software Introduction The IP Camera bundles Central Management System (CMS) software. Offering powerful functionalities via intuitive inter

70 Appendix A: Technical Specifications Camera Full HD Real-time Full HD Image Sensor 1/2.7" Progressive CMOS Picture Elements 1920(H) x 108

71General Operating Temperature -20°~ 50°C Humidity: 10% to 90%, No Condensation Power Source PoE Power Consumption 3.8W Reg

72 Appendix B: Internet Security Settings If ActiveX control installation is blocked, please either set Internet security level to default or change

73 Step 4: Down the page, press “Default Level” (see the figure above) and click “OK” to confirm the setting. Close the browser window, and open a ne

74 Step 5: Under “ActiveX controls and plug-ins”, set ALL items (as listed below) to <Enable> or <Prompt>. ActiveX controls and plug-i

75Appendix C: DC Viewer Download Procedure The procedure of DC Viewer software download is specified as follows. Step 1: In the DC Viewer installat

76 Step 3: Click “Finish” to close the DC Viewer installation page. Then, the IP Camera’s Home page will display as follows: NOTE: Please note

77Appendix D: Install UPnP Components Please follow the instructions below to install UPnP components. Step 1: Go to “Start”, click on “Control Pane

78 Step 3: Select “Networking Services” from the Components list in the Windows Components Wizard window, and then click “Details”. Step 4: Sel

7Check the status of the link indicator and activity indicator LEDs; if the LEDs are unlit, please check the connections. Green Link Light indicate

79Step 5: Click “Next” in the Windows Components Wizard page. Step 6: Click “Finish” to complete installation.

8 RJ-45 Dongle Cable Connection RJ-45 Dongle z RJ-45 Dongle Cable Connection Run the Ethernet cable through the Waterproof RJ-45 Screw-On P